Scalds and Burns
In the United States, more than 112,000 people enter the
emergency room at the hospital per year with scald burns. Of these, 6 percent or
6,700 have
to be hospitalized. Almost 3,000 of these scald burns come from tap water in the
home. The two high risk groups are children under the age of five and
adults over the age of 65. It only takes one second to get a serious third
degree burn from water that is 156 degrees Fahrenheit. If instant coffee
granules
melt in your tap water, it's set too hot and could cause serious burns to you or
someone in your family.
Safe Water Temperatures
Water at temperatures between 124 and 130 degrees Fahrenheit
is hot enough to do laundry, dishes and other household cleaning tasks without
causing
a major threat to you and your family. However, water heaters often are
installed at somewhere between 140 and 150 degrees. A word of caution - water heater thermostats are not very
reliable. Many are marked "low-medium-high" and who knows what that is? Those
that have
numbers shouldn't be relied upon either. Turn on just the hot water at your sink or bathtub. Let the
water run for three to five minutes. Then check the water temperature with a
meat or candy
thermometer. If the water is 130 degrees or higher, the thermostat on the water
heater should be turned down. Wait one day for the water to reach the
new temperature and then check the temperature at the same faucet again. Repeat
the process until your water temperature is between 124 and 130
degrees Fahrenheit.
Precautions When Bathing a Child
Another way to prevent scald injuries is to change behavior
when it involves children. Run cold water into a bathtub first and then add hot
water to
adjust the temperature. Before placing a child into the tub, measure the
temperature of the water. It should not exceed 102 degrees.
Take the phone off the hook while
bathing the child. This will help maintain necessary continuous supervision of
the child who is in the bathtub. Clearly
mark the hot water setting on single valve units and turn the valve to the cold
setting after filling the tub. This will reduce the risk of unintentionally
introducing
hot water into the tub.
Keep toys out of the bathtub.
Placing toys in the tub while bathing the child establishes the bathtub/bathroom
as a "play area." Give the child a washcloth
to hold and face the child away from the faucet handles. This will take their
attention away from the faucets and reduce the risk of them turning on the hot
water during the bathing activity. As the child matures, teach them that the
bathroom is a place for specific activities and not a play area. Establish
designated
"play areas" in the home and teach the child that these are the places to play
rather than the bathroom or other areas of risk.
Regulate the Water Temperature
Install a tempering valve (pressure/temperature regulating) in
the water line, which leads to the bathroom from the water heater. Set the
temperature at
120 degrees. This valve has the potential of totally eliminating the risk of tap
water scald burn injuries. If you live in an apartment, ask the building's maintenance
department to lower the hot water temperature. Explain why if they don't seem to
understand.
"Child-Proof" Faucet Valves
If you are building a home or remodeling a bathroom, position
the faucet valves at a distance of 36-40 inches above the bathtub. This will
prevent young children
from gaining access to the valve handles. Where practical, install the "push and
turn" type valve handles. These handles are somewhat like the "child-proof" caps
on medicine bottles.
Treatment for Scalding
If anyone is burned by scalding, run cool water over the burn.
Cover the burn with a clean cloth and seek medical attention. Never put
ointments, butter or
anything greasy on a burn.
|